Fast Free Shipping Nationwide
469.939.9400
support@firebrandrc.com
• Easily Adjusts Turnbuckles
• Adjusts Wheel Camber
• Grips Stripped Fasteners
• Off-road or On-road Vehicles
• All-aluminum Tool Construction
• Substantial “Hand-feel”
• Perfect Size: (L) 72mm x (W) 40mm x (H) 7mm
• Fits Multiple Hex Sizes (7, 5, 3.5 and 2.5mm)
• Color: Black/Hi-Ho Silver
• Scaled Realism
• Four (4) Door Handles, Eight (8) fastening screws
• Size: 7/8” Long (20mm)
• On-road or Off-road vehicles
• Black (Paintable)
• Multi-fit/1:10 Scale
• Features 16 Led Bulbs With 9 Different Flash Modes
• Easily Control Front (Blue & Red) Lights and Back
(Yellow) Lights with Two Separate, In-line Switches
• Powered By 9-volt Battery Or Can Be Plugged Into
The Illuminatrix 360 Light System
• Low-profile Unit Can Be Mounted Almost Anywhere
• Light-bar Accepts 3 To 12 Volts of Power
• In-line On/off Switch
• Multi-fit – 1:10 Scale, 4.5” (114mm) X 7/8” (22mm)
• Includes: Lights, Wires, Lenses, Fasteners And Decals
• Six (6) Bungee Tie-downs (100mm long)
• Three (3) Red, Three (3) Black
• 5.5” x 4.5” Decal Sheet Included (Die-cut)
• On-road or Off-road Application
• Fits 1:10 Scale And Similar (Multi-fit)
• Six (6) Different Side Mirror Sets
• On-road or Off-road Application
• Mirrored Decal Sheet Included (Die-cut)
• Two (2) Sets of Fasteners Included
• Fits 1:10 Scale and Similar (Multi-fit)
• Unpainted (Paintable)
• Four (4) motion-activated led hubs (red)
• 1:10 scale on-road (fits 4mm axel)
• Width 7mm, diameter 34mm
• Extends wheels out 7mm for wider stance
• Turns-on w/ movement, turns-off when stopped
• Easy to use – install batteries then replace stock hub
• 12 Bulb, Multi-fit LED Lighting System, 1:10 Scale
• Automatic Blinking w/Turns and Brakes
• Easy Installation w/Detailed Instructions
• Supports PPM/FM/FS 2.4G Systems
• Reveals the optimum gluing area and keeps it exposed
• Provides a “less-mess” tire-gluing experience
• 1:10 scale, on-road wheels and tires (52mm and 45mm)
• Make precise holes in lexan, plastic or soft woods
• All-aluminum tool construction
• Manual-power = more control
• Substantial “hand-feel”
• RC Body & Wheel Display
• Includes a Detailed Instruction Sheet
• 1:10 scale, Multi-fit
• (Dual-Function LED Lights) Red w/White Centers
• Easy to use, In-line “ON/OFF” Switch
• Plugs Into Your Receiver’s Extra Port
• (Dual-Function LED Lights) White w/Red-White Centers
• Easy to use, In-line “ON/OFF” Switch
• Plugs Into Your Receiver’s Extra Port
• 6.75” x 6.75” Scale Engine Insert
• Features a protective overspray film
• Includes large decal sheet w/metallic ink
• Decals die-cut for easy, “peel-n-stick” application
• Includes Velcro® fasteners
A precise and comfortable body trimmer
Easily mounts or separates used or new on-road wheels and tires. Galaxy Black w/Hi-Ho Silver Crank Shaft. On-road 1:10 Scale
Out Of Stock
Flashing Yellow-Amber LED Lights with “peel-n-stick” metallic-vinyl Caution/Utility Vehicle decals. Arctic White™ (Paintable) Multi-fit™/1:10 Scale
Includes: Decals, Lights, Wires, Lenses, Covers and Fasteners.
• (Dual-Function LED Lights) White w/Blue-White Centers
• Easy to use, In-line “ON/OFF” Switch
• Plugs Into Your Receiver’s Extra Port
Multi-fit™, 1:10 Scale Accessory Kit
Galaxy Black™ (Paintable)
Yellow, Flexible “Neon” Chassis Light Strips. (5″)
RED, Flexible “Neon” Chassis Light Strips. (5″)
BLUE, Flexible “Neon” Chassis Light Strips. (5″)
Four (4), Bright White LED Racing Lights. Multi-fit™/1:10 Scale
A variety of 20, Lexan, LED light buckets w/silver reflector decal sheet. Multi-fit/1:10 Scale. Unpainted (Paintable)
One (1) 18.5″ Highway Guardrail Kit, Alpine White™ Unpainted (Paintable)
Includes four (4), 7″ STIX Skewers, 4 tightening disks and 4 locking clips, Galaxy Black (Paintable)
High-Quality, Professional Grade Masking Tape. Leaves NO Residue Behind (24mm / 1″)
Includes Four (4) 2 3/8” Body Posts – Galaxy Black™
Flashing Red and Blue LED Lights with “peel-n-stick” metallic-vinyl Police decals.
6mm Locking Wheel Hubs (Hi-Ho Silver)
(6.5″ x 12.5″) Decals printed on clear, laminated vinyl wrap via 8-color press using metallic and white inks. Die-cut for easy “peel-n-stick” application.
Crawler Accessories: One (1) fire-extinguisher, two (2) gas cans, three (3) bungee tie-downs and one (1) cooler. 1:10 scale – Multi-fit. Thermo-formed and 3-d printed, plastic accessory detail pieces.